Hello all, I`m new to this forum, but regular visitor of Digideep.

Several months ago I bought my first DSLR Canon 400D, now I`m planning to buy Sea&sea;housing for it and start with ambiental photo (wreckage)…
I saw that Tokina 10-17 is excelent for that, now im little bit confused about ports and setup for my lens!What ports do you recommend for Tokina, and what port should I buy for 100mm macro lens.

Thank you all

I have this housing… there is not delete, menu, zoom, zoom out, and etc.

The ttl is some what ok, but this is only good for macro.

For wrecks… you will need to use full manual. A pair of Inon Z240’s does a great job.

For the Tokina 10-17 a fisheye port is what you will need, and a extension ring.

I recommend the NX-Custom Port for macro. You will need a extension ring to fit the 100mm macro.

I recommend purchasing a Patima instead of the Sea and Sea. It has all the control buttons missing in Sea and Sea.

tankado - 10 April 2008 05:04 PM

I have this housing… there is not delete, menu, zoom, zoom out, and etc.

The ttl is some what ok, but this is only good for macro.

For wrecks… you will need to use full manual. A pair of Inon Z240’s does a great job.

For the Tokina 10-17 a fisheye port is what you will need, and a extension ring.

I recommend the NX-Custom Port for macro. You will need a extension ring to fit the 100mm macro.

I recommend purchasing a Patima instead of the Sea and Sea. It has all the control buttons missing in Sea and Sea.

Hello tankado

I use sea and sea housing for my 350D,I will use 60mm macro and Tokina10-17,I need how long arms fit for Duo Ys110?

Thanks/Mark