Hi guys,
my new item the changeing socket is ready for dispatch.............
It is the solution for anyone who uses a Olympus cam with a Hotshoe
or a strobe socket ( C4000, C4040 ) this Bulkhead socket is designed especialy for the PT20, 22, 23 to change the Olympus socket into a Nikonos socket ( with one or two spring pinns (Nikonos V plug )).
The item inclouding the Oly TTL converter is also mountable onto the PT10, PT18, PT15 by drilling a 11 mm hole into them ( I have done it several times ) this is also a doing your self Item :D if you want .
So you are able to connect all strobes with a Nikonos V plug, a positive list of operating strobes you found at my site.
there for you only need a 14 mm wrench.......
Pressure tests are made down to 40 m but I imagin it will be seal down to 100 also because there are two O-Rings one in the hole and one at the top of the housing ( in a groove ) pressed by the mounting nut there is also a location gap for preventing turnment wich is locatet at the housing. This gap is only milled if needet......and the socked is filled with epoxi resin so it is also sealed inside.
